—
—
MT Tire Center fitment assistant
Find the right tire information before you visit.
Choose your U.S. vehicle, review common OEM fitment information, confirm the pressure label, and take a ready-to-install guide to your nearest MT Tire Center.
Vehicle catalog powered by the U.S. Department of Transportation's NHTSA vPIC service.
Vehicle fitment wizard
Build your tire guide
It takes about two minutes. Your final recommendation must be verified against the Tire and Loading Information label on the driver's door frame.
Step 1 of 4
Tell us about your vehicle
Select a model year first. Makes and models are loaded from the NHTSA vehicle catalog.
Choose a year to load makes.
Choose a make to load models.
Step 2 of 4
Your vehicle's regular wheel
We use the regular OEM reference for your selected vehicle when available. You can change it if your trim or installed wheel is different.
—regular wheel
Regular OEM reference
Selected vehicle
Common tireVerification required
Suggested cold pressureCheck door placard
Exact fitment can vary by trim, axle and factory package.
225/55R17
R17 = wheel diameter
Confirm the last number after “R” on your current tire.
If it matches the regular wheel shown above, continue. Otherwise select the wheel actually installed.
Step 3 of 4
Your preliminary tire guide
Review the fitment reference and select the branch you want to visit.
Store verification required
Fitment can vary by trim and axle.
Check door placard
Never use the maximum PSI shown on the tire sidewall as the vehicle recommendation.
OPTIONS
Neutral options for your selected vehicle
Featured brand tire suggestion
This guide suggests a commonly requested option for the selected type of vehicle.
Quality used tire
Availability requires an in-person safety inspection and an exact match for the vehicle.
Request after size verification
New and used availability changes by store. MT Tire Center will compare current inventory without prioritizing one manufacturer and will verify exact size, load and speed ratings, DOT age, tread and condition before installation. Reusing a safe tire can extend its useful life and delay disposal.
Confirm before installation
This guide is a starting point, not an installation specification. The vehicle manufacturer's door placard or owner's manual is the controlling source for tire size and recommended cold PSI. Modified wheels, towing packages, staggered fitments and replacement axles require an in-person check.
Choose a store
Where would you like to visit?
Step 4 of 4
Take your guide with you
Save the guide as a PDF or share it using the apps available on this device. Show it to the team when you arrive.
Save or share my guide
Keep a clean copy on this device or send the summary through its available sharing apps.
Your vehicleMT Tire Center fitment guide
PDF
Complete tire and auto care
Everything your vehicle needs in one visit.
New tires
Quality used tires
Flat repair
Mounting & balancing
Wheel alignment
Brake service
Oil change
Engine diagnostics
Suspension repair
A/C service
Wheel repair
Automotive repair
Four San Fernando Valley locations
Bring your guide to the shop.
Walk-ins are welcome. Hours at all locations: Monday–Saturday, 8:00 a.m.–6:00 p.m.; Sunday, 9:00 a.m.–5:00 p.m.
Winnetka
20041 Roscoe Blvd
Winnetka, CA 91304
Canoga Park
8317 De Soto Ave.
Canoga Park, CA 91304
Northridge
18640 Parthenia St
Northridge, CA 91324
Chatsworth
20841 Devonshire St
Chatsworth, CA 91311
Safety sourcesVehicle identification uses NHTSA vPIC. Tire pressure guidance follows NHTSA TireWise: use the manufacturer's Tire and Loading Information label or owner's manual, not the maximum pressure molded into the tire.
